Dlhá 1, 900 31 Stupava, Slovakia
Plastické mazivá

Lubricating greases

LUBOPLEX® HITEMP CSM MG 2

It contains solid lubricants of the highest quality and purity to improve its properties for the transmission of heavy loads at low sliding speeds. Extends lubrication intervals while reducing frequency of servicing.

Typical use

Suitable for lubrication at high temperatures in brickyards, in the ceramic industry, in the production of concrete and aerated concrete and in cement plants. For wagon (trolley) wheel bearings in tunnel kilns, rotary kilns and coal and rock mills, excavator belts, open spindle gears, racks and gear rims.

Parameters

Base oil (type)
mineral

Thickener (type)
Calcium sulfonate complex

NLGI
2

Base oil kinematic viscosity at 40°C, mm2/s
350-450

Operating temperature range, °C
od -20°C do +180°C

LUBOPLEX® UNITEMP SYNT CSS 2

Made from calcium sulfonate complex and high class synthetic base oils. Perfectly resistant to washing out with water, has good protection against wear and corrosion, good EP properties and good working stability.

Typical use

Suitable for use in wet environments with permanent penetration of moisture and water, and in a flowing water environment at low to medium speed bearings operating in adverse and difficult application conditions. Recommended for lubrication of electric motors, pumps, conveyors, agitators, gearboxes (gears), presses, winches, bushings, wheel bearings, chassis lubrication, universal joints, ball joints, end rods and steering joints as well as for lubrication of machines used in the paper industry.

Parameters

Base oil (type)
synthetic

Thickener (type)
Calcium sulfonate complex

NLGI
2

Base oil kinematic viscosity at 40°C, mm2/s
400-440

Operating temperature range, °C
od -40°C do +180°C

LUBEX® HITEMP 180 PUM 2

High temperature lubricating grease with excellent EP properties and wear resistance. The combination of a special viscous base oil, organic thickener and selected additives allows this product to achieve a very high application life.

Typical use

Recommended for lubrication (with very long lubrication intervals) of all high temperature plain and roller bearings in industrial applications such as: mining, construction, chemical industry, paper industry, agriculture, forestry, cement production, lime production, aerated concrete production and in electric power plants. It is used in production for asphalt processing in road construction.

Parameters

Base oil (type)
mineral

Thickener (type)
Organic

NLGI
2

Base oil kinematic viscosity at 40°C, mm2/s
460-490

Operating temperature range, °C
od -20°C do +180°C

LUBEX® HITEMP 200 PUS 2

High-temperature white lubricating grease made on the basis of organic thickeners and synthetic oils with excellent oxidation stability and a low tendency for oil separation and oil evaporation.

Typical use

It is designed for long-term lubrication for plain and roller bearings for applications at high temperatures, for example: in the chemical industry, in the textile industry, in transport and drying equipment, in general engineering and painting systems in the automotive industry, in film stretching machines, etc … J It is suitable for use in cataphoretic painting systems in the automotive industry.

Parameters

Base oil (type)
synthetic

Thickener (type)
Organic

NLGI
2

Base oil kinematic viscosity at 40°C, mm2/s
80-100

Operating temperature range, °C
od -20°C do +200°C

LUBEX® SYNTEMP 220 TES 1/2

Lubricating grease made on the basis of special organic and inorganic thickeners and synthetic oils with excellent oxidation stability, low evaporability and with the content of other selected additives.

Typical use

It is especially suitable for long-term lubrication of fan bearings, bearings in textile machines, in plastics and foil processing machines, in paper production, furnace bearings in the ceramic industry, automatic equipment in bakeries, in dryers, conveyor bearings in paint shop machines and machines for glass production, etc..

Parameters

Base oil (type)
synthetic

Thickener (type)
Organic and non-organic

NLGI
1/2

Base oil kinematic viscosity at 40°C, mm2/s
160

Operating temperature range, °C
od -20°C do +220°C

LUBEX® INERTOX 26O TEP 2

Extremely high temperature white lubricating grease based on perfluorinated polyether oils with white solid lubricants with a high degree of chemical and thermal stability, resistant to oxidation. It is characterized by excellent lubricating properties and exceptional temperature resistance.

Typical use

For lifelong lubrication of low-speed bearings in conveyors and rolling technologies, in painting and drying equipment, steam-heated rollers, bearings exposed to radiation and high vacuum. For rolling bearings in the production of corrugated cardboard (cardboard production), for rolling bearings of low-speed conveyor chains in textile finishing machines, in drying and enamelling ovens. It is particularly suitable for lubricating the rollers of bakery machines and also for elastomeric and plastic parts, where it does not cause any changes in these sensitive materials.

Parameters

Base oil (type)
synthetic (PFPE)

Thickener (type)
Organic (PTFE)

NLGI
2

Base oil kinematic viscosity at 40°C, mm2/s
400-500

Operating temperature range, °C
od -30°C do +260°C

LUBEX® UNITRANS LX-421

Multi-purpose lubricating grease for long-term lubrication, based on a lithium complex, with a wide range of applications, with good working stability at ambient and long-term high operating temperatures.

Typical use

Long-lasting lubricating grease, suitable for most industrial and automotive applications. It can also be used as a universal lubricant, which allows optimization in heavy industrial applications that require long-term or prolonged lubrication at high temperatures. Specially developed for bearings, especially for automotive bearings and wheel hubs for mobile machinery.

Parameters

Base oil (type)
mineral and synthetic

Thickener (type)
Lithium complex ("LX")

NLGI
2

Base oil kinematic viscosity at 40°C, mm2/s
160

Operating temperature range, °C
od -30°C do +150°C

LUBEX® GRAFO GEAR GEP 0

High EP protection against seizure. Allows direct spraying with automatic lubrication systems.

Typical use

Lubricating grease for lubrication of large open gears and drives, rotary and drying ovens, ball mills, excavators, long stressed chains, in the cement and mining industries as well as metallurgy.

Parameters

Base oil (type)
mineral

Thickener (type)
Aluminium complex

Base oil kinematic viscosity at 40°C, mm2/s
600

Operating temperature range, °C
od -20°C do +120°C

LUBEX® GRAFO GEAR KG 10

Perfectly eliminates friction and wear and protects against corrosion. High EP protection against seizure. Allows direct spraying with automatic lubrication systems.

Typical use

Lubricating grease for lubrication of large open gears and drives, rotary and drying ovens, ball mills, excavators, long stressed chains, in the cement and mining industries as well as for many other applications in industry. For different types of high-load sliding bearings, slideways and guide rails.

Parameters

Base oil (type)
mineral and synthetic

Thickener (type)
Aluminium complex

Base oil kinematic viscosity at 40°C, mm2/s
550

Operating temperature range, °C
od -20°C do +140°C

Cookies Details
This website uses cookies

We use cookies to personalise content and ads, provide social media features and analyse traffic. We also provide information about how you use our website to our social media, advertising and analytics partners. These partners may combine the relevant information with other information that you have provided to them or that they have collected from you when you have used their services.