Multi-purpose low-fog non-emulsion oil with inactive sulfur based on optimally selected refined base oils and synergistically acting combinations of additives.
Recommended for use in systems with one unit (machine) or in central systems as a universal metalworking fluid (coolant). It is used for machining steel, all non-ferrous metals and aluminum alloys. It is most often used in turning, milling and threading operations. It is suitable for use in automatic systems.
Kinematic viscosity at 40°C, mm2/s
46
Density at 20°C, kg/m3
886
Flash point, °C
210
Pour point, °C
-21
Copper corrosion - 3 h / 100°C, grade
1a
Chlorine-free, non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Contains additives to improve corrosion protection and resistance to aging. High-pressure EP additives and anti-wear additives increase the mechanical and pressure load.
Recommended for use in systems with one unit (machine) or in central systems as a high-performance metalworking fluid (coolant) for difficult machining of steel, stainless steels, nickel alloys and other hard-to-process metals. It is most often used in turning, milling, deep drilling operations and is also suitable for threading operations. It is not suitable for processing copper and non-ferrous metals.
Kinematic viscosity at 40°C, mm2/s
15
Density at 20°C, kg/m3
850
Flash point, °C
190
Pour point, °C
-27
Copper corrosion - 3 h / 100°C, grade
4b
Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for various operations, because it washes well and forms an adhesive film.
It is mainly used in precision cutting and cold forming operations of metal sheets and is also effective in milling, grinding and threading operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels.
Kinematic viscosity at 40°C, mm2/s
35
Density at 20°C, kg/m3
910
Flash point, °C
196
Pour point, °C
-18
Copper corrosion - 3 h / 100°C, grade
4b
Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for various operations, because it washes well and forms an adhesive film.
It is mainly used in precision cutting and cold forming operations of metal sheets and is also effective in milling, drilling and threading operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels.
Kinematic viscosity at 40°C, mm2/s
68
Density at 20°C, kg/m3
912
Flash point, °C
190
Pour point, °C
-15
Copper corrosion - 3 h / 100°C, grade
4b
Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for various operations, because it washes well and forms an adhesive film.
It is mainly used in precision cutting and cold forming operations of metal sheets and is also effective in milling, drilling and threading operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels. It can also be used as an additive to mineral cutting oils to improve lubricity properties in a concentration of 3-25%.
Kinematic viscosity at 40°C, mm2/s
68
Density at 20°C, kg/m3
932
Flash point, °C
188
Pour point, °C
-18
Copper corrosion - 3 h / 100°C, grade
4a
Neemulzný olej s aktívnou sírou na báze optimálne vybraných selektívne rafinovaných základových olejov a synergicky pôsobiacich kombinácií prísad. Viskozita oleja umožňuje jeho použitie v rôznych procesoch, pričom dobre umýva a tvorí priľnavý film.
It is mainly used in precision cutting and cold forming operations of metal sheets and is also effective in milling, drilling and threading operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels.
Kinematic viscosity at 40°C, mm2/s
80
Density at 20°C, kg/m3
916
Flash point, °C
198
Pour point, °C
-15
Copper corrosion - 3 h / 100°C, grade
4b
High-speed grinding, chlorine-free non-emulsion oil with inactive sulfur based on synthetic oils with synergistically acting combinations of additives. It contains additives to improve corrosion protection and aging resistance, EP additives and anti-wear additives that increase mechanical and pressure loads.
It is used in all grinding operations, such as grinding of inner and outer surfaces, high-speed grinding, slow grinding, grinding of gears from non-ferrous metals to high-speed steels. It is also suitable for general machining and deep drilling of ferrous metals. It is especially suitable for one-unit machines or for central lubrication systems, regardless of the type of filter used.
Kinematic viscosity at 40°C, mm2/s
12,5
Density at 20°C, kg/m3
838
Flash point, °C
164
Pour point, °C
-45
Copper corrosion - 3 h / 100°C, grade
1a
High-speed grinding, chlorine-free non-emulsion oil with inactive sulfur based on optimally selected refined and hydrogenated base oils and synergistically acting combinations of additives. It contains additives to improve corrosion protection and aging resistance, EP additives and anti-wear additives that increase mechanical and pressure loads.
It is used in all grinding operations, such as grinding of inner and outer surfaces, high-speed grinding, slow grinding, grinding of gears from non-ferrous metals to high-speed steels. It is also suitable for general machining and deep drilling of ferrous metals. It is especially suitable for one-unit machines or for central lubrication systems, regardless of the type of filter used.
Kinematic viscosity at 40°C, mm2/s
12,5
Density at 20°C, kg/m3
858
Flash point, °C
150
Pour point, °C
-54
Copper corrosion - 3 h / 100°C, grade
1a
Chlorine-free non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for vertical drawing and deep drilling cutting operations, because it washes well and forms an adhesive film.
Recommended for use in systems with one unit (machine) or in central systems as a high-performance metalworking fluid (coolant) for for drawing tools and tools for deep drilling and milling. It is used in machining steel, stainless steels, nickel alloys and other difficult-to-machine metals. It is most often used in vertical broaching operations, but it is also effective in vertical threading.
Kinematic viscosity at 40°C, mm2/s
18
Density at 20°C, kg/m3
860
Flash point, °C
190
Pour point, °C
-21
Copper corrosion - 3 h / 100°C, grade
4c
Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for broaching operations, because it washes well and forms an adhesive film.
It is mainly used in precision cutting and cold forming operations of metal sheets, for drawing, milling, drilling and threading operations. It can also be used for horizontal broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels.
Kinematic viscosity at 40°C, mm2/s
68
Density at 20°C, kg/m3
912
Flash point, °C
190
Pour point, °C
-15
Copper corrosion - 3 h / 100°C, grade
4b