We offer you an extensive range of automotive and industrial lubricants, cutting oils, compressor oils, heat transfer and forming oils and fuel additives.
In addition to these products, we also have other products available as per your requirements. Contact us.
We offer complete care, advice and also free technical service for the application of our products.
Special hydraulic oil designed for use in systems, which must be put into operation at extremely low temperatures with a following increase in temperature during operation, produced from highly refined basestock and synergic reacting additives without zinc content.
It is used as a fluid to transmit motion and power in higly stressed hydraulic systems subject to extreme temperature fluctuations for use in outdoor facilities such as mining and forestry machinery and hydraulic control and power supply system in the shipping (e.g. hydraulic rudder controls, stabilizers, cranes and winches). It can also be used in other industrial and commercial systems which require hydraulic fluids of similar specifications.
Kinematic viscosity at 40°C, mm2/s
32
Flash point, °C
100(PM)
Pour point, °C
-55
Viscosity index
300
Specifications / Approvals / Norms
DIN 51524-2 HLP, DIN 51524-3 HVLP, ISO 6743/4 HM, HV, AFNOR NF E 48-603 HM, HV, U.S.Steel 127,136, SS 155434;, SEB 181 222, DENISON HF-0,, HF-1, HF-2, VDMA 24318
Mineral oil produced on the basis of special refined, high quality mineral oils. Contains additives against oxidation and corrosion.
It is used for lubricating bearings, gears and in various tilting and circulation systems at low and medium loads. It is also suitable for use in less demanding hydraulic systems.
Kinematic viscosity at 40°C, mm2/s
22
Flash point, °C
165
Pour point, °C
-21
Viscosity index
100
Mineral oil produced on the basis of special refined, high quality mineral oils, containing additives against oxidation and corrosion.
It is used for lubricating bearings, gears and in various tilting and circulation systems at low and medium loads. It is also suitable for use in less demanding hydraulic systems.
Kinematic viscosity at 40°C, mm2/s
32
Flash point, °C
175
Pour point, °C
-18
Viscosity index
95
Specifications / Approvals / Norms
ISO 11158 HH, ISO-L-DAA, ISO-L-HH, DIN 51506 VB, DIN 51506 VC, DIN 51517-1 (C)
Mineral oil produced on the basis of special refined, high quality mineral oils, containing additives against oxidation and corrosion.
It is used for lubricating bearings, gears and in various tilting and circulation systems at low and medium loads. It is also suitable for use in less demanding hydraulic systems.
Kinematic viscosity at 40°C, mm2/s
46
Flash point, °C
185
Pour point, °C
-15
Viscosity index
95
Specifications / Approvals / Norms
ISO 11158 HH, ISO-L-DAA, ISO-L-HH, DIN 51506 VB, DIN 51506 VC, DIN 51517-1 (C)
Mineral oil produced on the basis of special refined, high quality mineral oils, containing additives against oxidation and corrosion.
It is used for lubricating bearings, gears and in various tilting and circulation systems at low and medium loads. It is also suitable for use in less demanding hydraulic systems.
Kinematic viscosity at 40°C, mm2/s
68
Flash point, °C
195
Pour point, °C
-12
Viscosity index
95
Specifications / Approvals / Norms
ISO 11158 HH, ISO-L-DAA, ISO-L-HH, DIN 51506 VB, DIN 51506 VC, DIN 51517-1 (C)
Modern industrial gear oil, made from optimally chosen refined base oils and additives.
It is designed for use in extreme and impact-loaded spur gears, helical and bevel gears in ironworks, rolling mills, mines, the construction industries, paper mills, textile mills, cement plants, rubber plants and other industries. It can also be used in circulation systems for lubrication of gears or highly stressed plain and roller bearings.
Kinematic viscosity at 40°C, mm2/s
68
Flash point, °C
205
Pour point, °C
-22
Specifications / Approvals / Norms
U.S.Steel 224, AGMA 250.04, AGMA 9005-E02, DIN 51 517-part 3-CLP, ISO 12925-1 CKD, ISO-L-CKD, David Brown Gear Industries S1.53.101
Lubocons Chemicals s.r.o. is part of a highly exclusive group of companies in the Slovak Republic which have met the strictest economic evaluation criteria according to the Dun & Bradstreet statistical predictive model. The company’s creditworthiness has the highest AAA rating.
LUBOCONS CHEMICALS s.r.o. has been developing, manufacturing and selling high-performance lubricants and additives since 2000.
We place great emphasis on developing new technologies, especially in the area of producing biodegradable special lubricants.
In addition to our activities, we make great efforts to ensure the protection of the environment and also the safety of the work of our employees.
We are on top of leaders in the formulation and application technology of the production of all types of rapidly biodegradable lubricants.